Mini Lathe - drilling without drill
347,725
Published 2023-03-11
All Comments (21)
-
Love the video--no music or hoopla--very relaxing.
-
I've used mini bars like these for years at my work, but never thought to try one without drilling a hole first. Well done, Sir!
-
Profestional friend. Yoy did very well. Great job.
-
Another great video! You do good work.
-
Subscribed! Wonderful video, thank you
-
I bought a similar second hand set from Bengs. I think the brand is Paul Horn. A new set is very expensive! They work wonderfully, but I got serious chatter on tin bronze which is rather hard and brittle. These tools are normally used with internal cooling in CNC machines, behind a screen. Be careful not to crash them. Flying carbide fragments can penetrate the body. They need some sharpening on a diamond wheel after a while. Maybe I will build a simple tool grinder.
-
I love this format of video no bullhit just straight up good machining work and its kinda like an ASMR for dudes that love shop work like myself lol great video!
-
Nice video, thank you for sharing it :)
-
Fantástico y preciso me encanta Gracias 🙏
-
Mình rất thích khi được xem bạn chế biến món đồ trên các máy công nghiệp. Chúc bạn luôn được bình an, nhiều sức khỏe và tràn đầy niềm vui trong công việc nhé 💞👍
-
Nice video
-
Good work
-
I use these tiny boring tools on my micro lathes, they're excellent! I prefer the Sandvik and Iscar branded ones because they have an ordinary round shank which makes things much easier. 👍
-
Horn bores you can have coolant running through them used many of these very good for a finish turn brings out a good finish if used properly
-
Je kan inderdaad in veel gevallen met een Boorbaar een gat maken zonder voor te boren. met een 12 mm Iscar boorbaar met wisselplaatjes gaat het ook.. Je hebt deze boorbaartjes gekregen schreef je, er bestaan er ook met gewoon een Cilindrische schacht, dus volstaat in dat geval een gaatje boren en daarna ruimen voor een goede passing, en dat zal een stuk stabieler zijn dan dit gat, de achterkant van deze boorbaartjes heeft een schuine kant, die kun je gewoon af laten steunen op een klein Paspennetje dat je dwars door je houder perst, en dan heb je meteen een diepteaanslag Als je een slijpmachine met Diamantschijf hebt, kun je ze ook zonder al te veel moeite zelf slijpen uit versleten of gebroken freesjes van VolHardmetaal, werkt perfect, ik maak zelf ook zo mijn boorbaartjes, en gebruik ze in Titanium
-
I did this on accident a couple of years ago on a citizen swiss lathe. The drill broke on a copper job and the ph horn boring bar kept making holes. I couldnt believe it.
-
I can't help it but wounder if boring via the tailstock gives better precision. At least on a mini-lathe where cross-slide is so unstable, or........
-
Very fun! That is the cutest little multifix-style toolpost. What size is it, AA?
-
12:40 I have he same set of drills and taps, bought mine at Lidl 😀
-
Es bueno, asta para hacer fresado y roscas