how to wire 4th gen ram heated seats in 3rd gen
9,035
Published 2020-11-10
All Comments (21)
-
Great video. I’ll be attempting this in my 06 megacab soon. I have heated and cooled black leather seats and was trying to figure out the heated and cooling before I started. You did half the work. Thank you.
-
Thanks bro you save lot time to figure out you save my day another follower 💪
-
Great video man! Quick question will you make a video of the jump seat install when you get the brackets for it?
-
Hey man. Awesome videos. Im doing this to my 03 truck, didnt have factory heat. (SLT) but it currently has heated seats from an 08 that arnt currently hooked up. My question is can i still do this using the 08 modules in my 2014 heated and cooled seats? Also do i need yo get that seat switch panel? Thanks
-
I would be super interested to see a diagram that was labeled more like which colored wires represent which feed (heat powe from truck.. heat power to seat) or something that might help me with my wiring them up onto the 06 dodge.. there is no module under the seat like in your truck, the module is integrated into the heated seat button so there’s just a heated seat power feed under the drivers seat that needs to be directed somewhere and im having a hard time finding where to connect it to
-
Putting a 2021 longhorn seats on a 04 and looking good
-
I bought a 2004 heated seat module, will it work in a 2009 dodge though. The pickup is a slt but I put in the factory heated seat switches for it and a different floor harness. The heated seat switches just blink but that’s probably because I don’t have the floor plug going to any heated wiring.
-
for all the guys asking me about weather this will work on late third gen trucks it should because all your using from the fourth gen seats are the elements you do however need all the heater wiring and module from the third gen seats
-
I’m doing this on a 2003 with the factory heated and powered seats on both sides, I’ve got an extra plug on my crossover wire to the passenger seat, as well as an additional plug on the seat belt and heater element set, as well as 6 wires from the plug under the drivers seat including the main power and ground, any ideas if this will still work or what they could be for?
-
Hey. Great video. I have a 4th gen Ram 1500 manual. Could I convert it to power seat? Would it be plug and play? I see a yellow connector from the car I assume powering the air bag.
-
Great Video, but I have a 2004 that does not have existing heated seats and i'm putting heated seats in, so my question is if the harness and wiring would look the same in the 3rd gen or if it's vastly different? And also how to get a switch to work with it?
-
Hi I have a 09 3gen mega cab leramie with factory heated seats.I just install some 4gen heated and cool seats plus the jump seat. Where the 3gen factory seat heater module ? Thanks bud
-
I have an 05 Laramie, someone stole the Laramie seats and put in vinyl base model seats. I am wanting to add heated seats and use factory switch under radio. Do all pickups need the heating module and such? Trying to piece it all together to get heated seats back!
-
Hey I’ve installed 4th gen seats on my 3rd gen but the buckle chime is coming on & I’ve been using ur vid of how to make the auto seats work. My question is if I connect the buckle wires work with just power & ground?
-
I have a late 3rd gen laramie and the passenger seat heater plug is different, it is green with two wires. I can cut the wires for the plug and hard solder , how would i know which wires to solder?
-
I’m going to install 4th gen seats in a 2005… I have factory heated system but the 4th gen seats have heated and cool… would everything still work the same as of for the plugs… also are the plugs from the 3rd gen seat the same as the 4th gen as like the seat belt etc… you kinda making look like it’s plug and play except the heated components
-
How do I hard wire heated seats I got the same seat I’m swapping into a 96 dodge how would I do that?
-
What if I'm adding seats full power and heated to a truck that was non heated or power but want to add factory heaters and switches? What needs to be done to accomplish this?
-
What color wire would the cooled seat be on?
-
Sam I have a 3rd gen harness for heated seats and the wires on the plug going to the floor is different colors they are 2 reds with blue strip are them the right ones
