Finally a affordable CNC plasma table Crossfire from Langmuir systems

211,708

4,039 0

Published 2019-11-28

This is the Crossfire CNC plasma table from Langmuir systems.
Here’s a affiliate link to the Crossfire website if you are interested in checking out the table
store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!
It’s a surprisingly affordable 2x2 table at $1500, I added the optional XL table extension for $150 and the optional stainless steel water table for another $150 but for $1800 it’s really a quality table!

Disclaimer: Important Safety Information
Your plasma cutter power supply will expose you to high voltage and high amperage electrical components. It is your responsibility to make sure that all work is done safely and with the power disconnected. If you have any doubts regarding your ability to safely perform this work, you should consult the services of a professional electrician. Mike Festiva will not be held responsible for any injury or death resulting from the incorrect or unsafe execution of this procedure.

All Comments (21)

@Mikefestiva 4 years ago

Here's some helpful videos I have found on Fusion 360, These videos I found to be the most helpful for me to learn how to use Fusion 360 fairly quickly by following along. If you like the videos, help the guy out by clicking (like) and leave him a nice comment! Fusion 360 learning to draw plus tool paths https://youtu.be/7b5kpeV6y5M Part 1 practicing Fusion 360 https://youtu.be/tF0slQ5FbmA Part 2 practicing fusion 360 https://youtu.be/Sy55EeiYYrU PS he is a school teacher and these videos were made for his class. Here’s an affiliate link to the Crossfire website if you are interested in checking out the table store.langmuirsystems.com/?aff=16 Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table! *After Running the Titanium Plasma 45 for 3 years it's held up great! But I feel the Hynade CUT 60 CNC Plasma with blow back pilot arc start offers much better value and is PLUG and PLAY CNC ready** Amazon Paid affiliate links below Hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN) amzn.to/3DEzR2m
@davekimbler2308 4 years ago

No .... that really cool ! I finally got a plasma cutter , my wife bought it for my birthday , and I can’t wait to start making brackets and tail light holders and such ! I’m 62 and never used one before but have been fabricating choppers and go-carts and yard art other things with a motor . I know It’s opening a whole new world for me , and my creations will look that much better !
@hypersmudge1 4 years ago

Incredible what can be done in a home shop with the aid of one of these machines! The possibilities are truly endless. Thanks for doing these awesome videos, Mike. Always superbly done.
@WELDERMADEHEADBANDS 4 years ago

I subscribed after you mentioned family. Found your channel couple weeks ago - I appreciate your hard work and information on all the equipment you try out. Honest. Thanks & keep it goin
@richardsink9198 1 year ago

I just bought a table with your promo code. It still works in 2023. Thanks for the videos. I have been wanting to do this for a few years and finally i just bit the bullet on this one. I still need a plasma cutter, but that should be no problem.
@JeffThalheimer 1 year ago

Great video Mike. Your coverage was excellent. I can’t wait till I get time to see your other reviews.
@JoshuaBence 4 years ago

Thanks Mike, you just answered pretty much all of my questions amade my mind up about purchasing the titanium/langmuier setup! Your videos are appreciated!
@7mikepd 4 years ago

You are the man. Thanks for passing down knowledge for generations whose parents would not teach them anything.
@alanm3438 4 years ago

How cool. I have a Torchmate 2X2 and I have made thousands of things. The best piece of advice that I can give anyone with a plasma cutter is to buy the small Harbor Freight air dryer. It cost about $500 but worth it. The other thing is to put a plastic bag around the handle trigger since you have a water table. That plastic bag will save you hundreds of dollars. I like your machine but I was a little concerned about the gantry arm only having one support instead of two. If you live near Racine, WI I would love to share programs with you. It looks like you know a lot and well on your way. I make most of my art program just by tracing in CAD.
@mcremona 4 years ago

Thanks for doing videos on this thing. I’ve been pretty curious how well they work.
@ToddLarsen 4 years ago

Thanks for the code! Saved $100 bucks on my order. now i can't wait for it to arrive and earn me some $$$ Thanks for sharing and always keep building👍
@motomule 4 years ago

Awesome Mike!!! Your future projects will all be planned out differently now... Congrats on the affiliate deal!!! Can't wait to see the quad makeover!!!
@bobbalbirnie2478 4 years ago

Glad to see you with a new toy, I am sure there will be some innovative talent displays arriving in our YouTube notifications soon. Great job explaining the process, looking forward to see what you will be creating.
@joelspann228 4 years ago

ive been looking at this table for a while, this is the best video ive seen on it. im sure not no computer guy, being a equipment mechanic my extent of them is opening and closing work orders and ordering parts. this will be interesting to learn. I like how you talk to people not down to them. great presentation
@bigb7157 4 years ago

Great channel. I recently bought the Vulcan mig215 and Vulcan protig after watching your channel. I use a wide variety of Miller welders at work and I think the Vulcans hold up well against some very expensive welders for home shop use. Enjoying the plasma cutter videos even though I’ve never used one lol. Great watching guys build real stuff.
@quietclarence7998 4 years ago

Great video Mike. I just bought the titanium 45 few days ago and it suppose to be delivered tomorrow. Can't wait to play with it and start to save up for a plasma table
@markcnc 4 years ago

Hey Mike. So i took the plunge, ordered me one and used the promo code you provided. I am excited to say the least. Thank you sir.
@shaunjackson2603 3 years ago

This is such a good video. Great work mate, I’ll appreciate it even more once I get myself up and running. Cheers!
@papasteve215 4 years ago

Great video as usual. I was just thinking that I haven’t seen any videos from you lately and was happy to find this one. I’m not sure that I’m ready to take the plunge for the table but your video was informative and well made, as usual. Thanks
@bud1412 4 years ago

Wow Mike, you just keep getting better and better. I only wish I was younger, a person could make a lot of side money making one off parts for car builds, and motorcycles. Always happy we I see a new posting from you.