the world first commercial flywheel Energy Technology - 0% input 100% output

It's an energy storage device. The utility spins up 2.5 tons of kinetic energy. Then it can supply electrical output from the rotating flywheels. The useful output must be some percentage less than the total input.

The power to the motor cannot be measured around all 3 conductors, as the sum of their current is zero.

First of all please don't mix Kinetic and Electrical energy with spiritual energy 😂😂

I like the way he measured the current to the motor. What a trick!!! :)

The amount of energy input to this machine is much higher that the energy output. Bearing friction losses, drive belt loses, windage losses, motor losses, generator losses, gearbox losses, etc. If the machine is really efficient, at best you may get about 60% of the energy out of the generator that you put into the motor.

Respect the way he try to measure the current of the whole bunch of wires at once.

What is the friction losses value couldn't be zero. Reverse current mechanism from the starter motor, Start button from the flywheel machine and stop button from distribution panel, we have more doubts in its process. Mechanical losses, electrical and thermal losses are zero? Not possible

Load up the generator to its rated load and the flywheel will eventually stop due to larger counter emf and losses on the rotor.

Similarly velocity force/spring/trigger force like that used for firing a gun bullet can also be used for producing kinetic energy.

I wonder the way you use clamp meter to measure motor current of 3 wire at one instead of one by one

While you are checking the input consumption with clamp meter not showing any amp because of you have clamped with insulated negative and positive together running wire. The clamp meter will read only a single polarity wire only. Please don't post like this 0 input with high output.

This is just what I need at my ocean front property in arizona!!

This is what I dreamed when I was 13 years old child !!!

I'm curious to know what he shut off to cause it to stop rotating. Is there a braklng system, it slowed quite rapidly.

When he put the amp clamp on the wire for input at about 4:30 , he put it around all 3 conductors, amp lamps won’t work around all conductors. When he put it on generator output, he put it on one leg or conductor. This thing is a hoax and can’t possibly work, otherwise he would be a very wealthy man.

Shivam starts it initially with which power source? If external electric power is connected then how much of energy it consumes?

Congratulations sir this is very great invention this country requires people like you pl go ahead and start duplicating and solve the power problems.I have seen such unit in Hyderabad but till date it has not been takem off'.

Mr. Roshan, please see that you don't confuse electrical energy and total energy. electrical energy can be amplified 15 to 20 folds with low spec machines. don't even need higher weights having flywheels. with regular ebike motors and home made alternators, with sufficient cooling setup, the torque difference between the ebike motors and Alternators can be given and the whole concept just works based on inertia and one more basic idea, that is, the input getting motor's torque to spin at specific rpm should be always greater than the output generating alternator's torque necessity to generate the necessary electrical power. All one need is to know the basic understanding on motors and generators (or alternators) for building this kind of machine.

Surely, when the motor is disconnected from the grid supply it is then powered by the generator? Anyway, a very impressive machine! 👍

Bravo! Love from Serbia.