Power Hacksaw [Restoration]
3,402,588
Published 2017-11-26
I was not overly impressed with the build quality on this tool, so much so, that I would probably not use it and I do not want anyone else to use it ever again. That is why I decided not to replace the power switch on this tool. The majority of the hacksaw is made with sections of angle iron welded together. I even had to hammer off the slag from the welds for painting, as it was never done the first time around. It was also odd to see shafts with no bushings or bearings around them for support. I imagine heavy use of this machine would wear out these parts very quickly.
There is no way to adjust the feed pressure or to make the cut more straight and square. This must have just been a nice thing to have that would quietly cut metal for further clean-up.
I understand that this tool was built in a time when most tools were starting to be made with cheaper materials and methods for competitive reasons.
I tried to match the colour as best as I could and applied 3 coats of filler primer, 4 coats of blue paint, and 3 clear coats. I used the snap rings I had lying around as I didn't want to buy whole new sets of them just for this application.
With a fresh blade, the saw did cut quite fast, but was not square. If you do come across an old power hacksaw, look for something built better and with adjustment mechanisms.
EDIT: The part of the video where it says "Title Text Here" was meant to talk about the old power switch location and why I didn't want to replace it.
Also, the bearing was warm while the rod was around -20C. Hopefully, that helped with hammering the bearing on, haha. As shown in the video, I used the old outer bearing race to support the new bearing while I was hammering the wheel onto it. I still need an arbor press.
Help secure more tools for future videos (if you want): www.patreon.com/handtoolrescue
Instagram:
www.instagram.com/handtoolrescue/
All Comments (21)
-
When are you going to do a restoration on that jacket of yours? Lol.
-
Very cool project. I realize I’m really late to the party, but I believe the rod you reinstalled at ~29:50 in the video should actuate a limit switch under the frame that shuts off the motor when the saw has gone through whatever you’re sawing.
-
No music, no noise... Just the sounds of taking it apart... So nice!! Well done.
-
We had this exact tool in the metal shop in my high school. Brings back memories. You had to hold the blade up and not let the weight of the arm weigh down on the material being cut. If you did the blade would break. I don't believe any of us ever wore safety glasses when using this tool.
-
For hating a machine it's amazing how well you did. It's also amazing how far you've come in 5 years with you're restoration projects and how you go about doing things. Great job!!
-
I used to watch American Restoration on cable channel but your in a league on your own, awsome work, dedication and knowledge on how to take apart, clean, paint and not only make it look great but work the way it was intended to function. You have a fun sense of humor while you work and you provide great tips on how to restore antiques. Keep these fantastic videos coming. Thank you very much!!!
-
Great content , i watch you all the time, because i need inspiration for my chanel, i hope one day i will be big like you on yt. thank you for all video
-
This was intensive! Way to stick it out through the end. I was thankful that motor started right up after the cleaning and rewiring.
-
list of tools and things i need in my garage #1 a garage..
-
Thank you for no music!
-
Pretty sure the electrical box underneath was for an auto stop switch, thus the hole and pokey bit.
-
Thank you for posting videos like this. You are keeping the history of tools alive! Well done!! Five stars!
-
I was amazed at how quiet it ran after resto. I also enjoyed the rib bone spacer.
-
Man. You Rock. I see these things you restore and WOW. So cool!
-
25:37 Should have been an internal snap ring/circlip and not an external one. That’s my only criticism. No annoying music, internationally understood without a voice over. A great project! Thanks!
-
I stumbled across your videos today and have to say im part of a generation who believes when an electronic goes bad the only recourse is to toss it! Its really cool to see that there was a time when you could fix it!! Awesome vids!
-
My grandfather had two of these working and two more stored under his metal racks. Although his were a different design, they had two "L" arms which supported the arm when not in use, they were rocker design to drop into support position automatically when the arm was raised. The units were also older than this model. I remember them running in his shop when I was six or so and that was the 1960's
-
I can't get over how quiet it is when it's running! Amazing job as always!
-
Had to laugh at the 'Do not cut self' warning, the hacksaw blade is only a minor danger, Compared to those unguarded spinning pulley wheels, belts and chain!
-
Merci pour votre travail de restauration, de préservation, et votre humour... J'apprends plein de chose et en plus, ça me détend! 👏👏🙏🙏
