Snow Tracks - DIY Heater and Enclosed Cab BUDGET BUILD

69,787
0
Published 2024-01-13
Adapt random tracks from a Can-Am to fit my Yamaha Rhino UTV.

Stuff I used in the video:
Lighted Whips(4' is what I used): amzn.to/3tGmAG0
Infrared Phone adapter Android: amzn.to/47AhPve
Infrared Phone adapter Iphone: amzn.to/48tunpN
Wiper Blade Manual universal: amzn.to/3NXMRGD
Bilge Air Pump Fan: amzn.to/3SgRf64
Clear Plastic window film: I used 5mil/5guage/.005" which is sufficient but I would ideally go thicker to around 10mil. The commercially made rear window I bought is around 10-15mil. A thick clear window used on things like Jeep soft tops/convertible windows is around 30mil. You can buy 10 mil at most fabric shops or here are thicker options: amzn.to/3vxc8AZ


OTHER VIDEOS I discuss/mentioned
Safe build:    • Build a fireproof SAFE from scraps  
Garage door lights:    • Lights on Underside of Garage Door  
Heated $20 Jacket:    • DIY Heated Jacket USB powered - CONVE...  
Tire Sidewall repair:    • Tire Sidewall PUNCTURE permanent repa...  


After Thoughts about the Video:
Doors: I would actually like shorter half doors. I feel too enclosed in the cab with both doors on. I like to stick my head out like a dog and enjoy the scenery/view what I'm driving over. The material I use is on the thinner side as well(just what I had laying around) so I would get slightly thicker material. I used 5mil/5guage/.005" which is sufficient but I would ideally go thicker to around 10mil. The commercially made rear window I bought is around 10-15mil. A thick clear window used on things like Jeep soft tops/convertible windows is around 30mil. You can buy 10 mil at most fabric shops or here are thicker options: amzn.to/3vxc8AZ


Heater: 1 issue is the humidity that is caused when you hit a snow drift and the snow melts on the radiator. This was easily remedied without a full enclosed cab. I had no overheat issues an the motor actually ran way cooler than it does in the summer.

Tracks: I had full intentions to 100% fabricate my own tracks. I have them 90% sketched and engineered. The frame work is the easy part and could likely be done sub $500 total in materials. The issue arrives when you wan to put rubber tracks on. Buying tracks sets you back around $600 per wheel! I had issues trying to find 3-4 identical old free snowmobiles to harvest them from. That's an entire can of works itself. So I set off to buy a cheap second hand set as new sets are going for nearly $7000. Every market is different and I kept loosing out on sub $1000 dollar deals on tracks. I ended up with these for $1500 after nearly a year of searching. That's less than my parts list to build them (around $2500-3000)


SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted_button_id=NS699E56WT…
www.instagram.com/sixtyfiveford/
www.facebook.com/sixtyfiveford/

Ginger Birthday wish list www.amazon.com/registries/birthday/1JJFHIQRBY14H/g…

















Yamaha wolverine sxs side by side tracks camoplast soucy tank snow mud polaris rzr razor wheel adapters quad four wheeler atv can-am hisun kawasaki yxz1000 Honda pioneer Maverick x3 Commander Defender SxS Outlander Renegade Rmax vicking tyrex cfmoto massimo tracked vehicle
65 Ford 65Ford SFF

All Comments (21)
  • @lalmuanpuiamizo
    It's been 9yrs now, I'm so glad I found your channel. The things I love, dogs, diy, reuse and repurpose, humour, humility... all at once. Thank you and good luck to you (though I'm afraid it did nothing :) )
  • @danh6746
    Always love seeing the clips of you and Ginger hanging out and having fun. It's great to see a YouTuber being a good influence and role model for young future pet owners. Thanks for the great content Moe!
  • @alsouthern7190
    You did an awexome job with the tracks and Ginger did an awesome job with the chicken!
  • @ericvaughn1126
    Stupid awesome mods man and I had to stop in the middle to send the video to the wife and kids to see Ginger leave that chicken patty alone until you got back! 😮😳🤯. Love everything about the heated track machine with bonus cool AND safety lighted whips! Drone footage is killer. Keep em coming Moe!
  • @Joe.Doucette
    Excellent! You could make a little diverter tube to send some of the heat to clear the windshield so you could keep the doors closed when Ginger is with you. After watching you for years I still get a bit of twinge when I see Ginger running circles around when you drive. Amazing pup.
  • This reminds me of my dad. He does cool stuff like this and it always blows me away that people like you and he can think of things like McGiver. Awesome job 👌
  • @yodasbff3395
    Ginger has incredible discipline, she is such a good dog. Yoda would have consumed that chicken the second I turned my head.😂 You did a great job turning your Yamaha into a snow machine. You and Ginger are going to have many hours of fun with it.
  • You’re so lucky to have such a great dog as ginger!! You only get a few like her in a lifetime so always be grateful for her 😢
  • @trxtech3010
    Looks so Cozy to drive around in at night in the snow! lol Ginger is to damn cute!
  • Moe, I’ve said it a hundred times already but you never cease to amaze me! My best friend is just like you, you guys can just do anything mechanically! Keep up the good work!
  • @bhoss7133
    0:20 Love your attitude Moe! You know you have the skill & talent to tackle & complete whatever your goal is!
  • @fraydnot
    What a cool build. Thanks for the upload
  • @chrisnorcross618
    Brilliant mods. Especially the heater. That's a game changer for riding in the cold.
  • @j.wilson641
    Love your projects! The way you figure out how to budget build things is the best! Been watching you for years.
  • @jbj27406
    Having used GE appliances for over 50 years in our homes and rental properties, naturally, when I remodeled my kitchen about three years ago, I bought an entire new suite of GE appliances to replace my old ones, which were also GE and which had served me well for over twenty years. Unbelievably, I had trouble with each and every appliance that I bought. I said to myself, is this the same company that I've bought dozens of well-built, reliable, long-lasting appliances from over the last five decades? Well, no, it isn't. In 2016, GE sold its name, and its name only, to a Chinese company by the name of Haier. Just a word to the wise. They don't build them like they did in 1965. Or even 2015. Great project. Looks cool. Works great. How many MPG?
  • All leg drive is still a little better than the tracks. Nice job on this mod.
  • @bombardierparts
    Ginger listens better than a wife.😅😅 Nice job as always!👍
  • @bctruck
    Ginger is more trustworthy than me. I would have ate it then blamed it on a marauding gang of gypsys. I sure do enjoy watching your channel. Your builds and fixes are astounding and why I watch, but your relationship with ginger is icing on the cake.