Paintball Tank Regulators: What You Need to Know // Punisher's Paintball

Is the output adjustable on all regulators either via shims, washers or spring?

kinda late but this video helped me choose the SL2 with V2 pro reg. thanks for the info

Honestly I'd run lower output pressure on all of my tank's. It's less risk of damaging the solenoid, less risk of damaging the gun/marker, and you get way better air efficiency. Also most guns now a days run better on lower output pressures of 400psi-500psi. So unless your gun/marker requires higher output pressures. I'd adjust all of your adjustable regulator's to low output pressures of 400psi-500psi. Unless your specific gun/marker requires and says run a higher output pressure. But like I said now of days I don't think there's a single gun out there that won't run on pressures between 400psi-500psi.

Can you do a side by side shooting comparison? Same tank/gun with two different regulators?

If I used a ninja 50/4500 lite air tank fresh out of the box and hooked it up to a Tippman I wouldn’t need to adjust anything for those guns would I?

I’m wondering, I have two hk tanks different sizes but 3000 psi, the bigger tank is from amped airsoft and said it’s slp, new tank the smaller one is from evike but is not slp. Is it the tank specifically that makes it slp aswell with the tank regulator or is it just the regulator that makes it slp meaning that if I wanted too, I could move the amped airsoft hk modded regulator slp to the smaller hk tank? I’m just trying to get not to blow up and can’t find a definitive answer if the tank(without the primary tank regulator like in the video) has to be slp too for my secondary regulator

Also angle a1 fly need low out put regular.

Here’s your once a month comment lol

How are the "HK Army AeroLite2 Pro Adjustable Regulator"?

would you happen to know the operating pressure of a Tippman 98 Custom pb gun? I'm just back yard plinking and want to get as accurate as possible. Heard I should try for 250 fps....which means i need a chronograph?

Thanks for the video guys. What I don’t understand is why is the output pressure so high when guns like my EMEK operate at 132psi? Also does lower output pressure increase the amount of shots per tank? Thanks for answering my questions.

Is there anyway to get the regulator to put out the full 3k psi ?

I just ordered a Ninja pro v2 slp reg for my cs3 that I’m getting… will it work? I saw that the tank output pressure for the cs3 is 250-450psi.

Where is Keegan? Taking a leave of absence?

what set for the EMEK EMF100?

What's the best high end reg on the market for a CS2 Pro?

Did anyone here use a vanguard demon from back in the day?! :')

Is it true you have to replace your Air Tank every five years? And if yes why??