Crosman 2240 HPA PCP BUDGET GUN Field test plus updates to shroud
109,075
Published 2017-05-05
All Comments (21)
-
Building a 2240 now love them 18” barrel steel breach and stock great fun. Like your videos 🇺🇸🇺🇸
-
Thank you for sharing your videos regarding converting crosman guns to pcp; they helped me figure out what I needed to convert my .177 victory cp2 and .22 diana chaser to pcp and while I currently have ONE set to take either pcp or co2, I fully intend to have both configured as such with personalised stocks. I'm pleased with the results so far :D Keep up the good work :D
-
there is an inline through the power adjuster cocking device you might be interested in !
-
Mr.air velocity you have a real talent hands down !!!bravo !
-
steve im overwhelmed how great the silencer and trigger mechanisms are when watching no movement in the gun and wow silent, tell me your secrets , youve got to share steve please any info very welcome, because im mesmerised lol?
-
Could you do a DIY video for the shroud? Greate video ☺
-
your BUDGET GUN is totally awesome its putting pellets in the same hole
-
Nice! I have a 2240 with a few mods but NOTHING like any of yours. Very ambitious and cool.
-
Really enjoy your older crosman vids.
-
Very likable young fellow! Highly informative. I am going to buy the 2240 from Crossman Custom after X-Mas.
-
A budget rifle well over $500 with all the mods.🤠🇺🇸
-
I had a problem with my gun also and the pellets spiraling out of control. It had something to do with the alinement of the shroud. I took shroud off and gun was much more accurate. I found that the pellets were clipping the washers inside the shroud. I rebuilt shroud and made sure everything was alined and it shot well after that.
-
Great Video, thanks for sharing. We can learn a lot from someone like you. I'm no expert on Air Rifles, but I was told that the reason for those bad short groups at first, was that the barrel needed to acclimate itself to the pellet being used.
-
My apologies.... for asking too many questions...on the shrouds.... But I think you answered my question about the way you put the Shroud using PVC in this video,... I had just asked about it when you made the First shroud on the gun that previously had a TKO on it.. but Thank You
-
Awesome video Steven I would buy one of those hand made guns from you very koo and accurate gun thanks for sharing bsafe
-
Sweet. I like all 3 of them . Well done
-
Great fun , great vid ,, cheers Shane uk 🇬🇧
-
I saw a video in Youtube where a Guy hade installed the Hipac. The screw that holds the valve gave Up and the valve blew out and he hot it far in His thigh. He showed the hole. IF you install a hipac first drill and thread so you have 2 more screws that holds it. One on opposite side of the valve.
-
i use home made leather washers and its less than 15 db and also using a pvc pipe as a shroud . its great for varmint hunting
-
Thankyou very much for your time and effort. Very instructional videos. I've made a shroud that works very well and is low budget. I would like to send you some photos if you would like.
