Elegant mechanism for DIY Power Hacksaw 【Part.1】
1,079,047
Published 2023-09-06
jsk-koubou.stores.jp/
I made a power hack saw using an aluminum frame.
All Comments (21)
-
If you like the video, please introduce it to your friends and social media !
-
It would only take me a month to design my own, another month to build it, but a full year to find all the hardware. JSK's designing and building skills are great, his shopping skills are much greater!
-
During 19 minutes I was desperate, no Double Side Tape. And then at the 20 minutes mark it appears! If one day there is a competition about overengineering with Germany, Mr JSK shall represent Japan.
-
Как говорится, у самурая нет цели, только путь :) Видос очень увлекательный!
-
У меня сложилось устойчивое ощущение, что кнопка "стоп" долго не проживет, при такой падающей массе на нее в конце реза.
А так - конструкция действительно изящная. Респект автору. -
Nice job. Two things that will make this better: 1) a hydraulic cylinder to control the downward pressure. 2) a mechanism to lift the blade up on the return stroke.
-
I built a hacksaw for 60 dollars. The motor is dc operated and is speed controlled. I got this stuff from Taobo for only 30 dollars. It features two 12 volts lithium batteries and so it was a cordless device , which can be used everywhere without AC supply.
-
Very nice design 👍you could add a small shock absorber so the saw doesn't slam down on the end stop so hard when done. Also it would be great to have a vice on each side of the saw blade to hold everything in place for larger pieces and prevent a burr at the end.
-
Bonjour Monsieur, c'est bien la première fois que je constate une anomalie dans vos excellentes et formidables réalisations. Dans le mouvement d'une scie à main, l'aller coupe et le retour de la scie se fait en soulageant le poids que vous exercez sur la scie afin de ne pas user exagérément la lame. Dans votre cas la force du retour reste identique à celle du mouvement "aller" et c'est antimécanique. Merci pour vos surprenantes réalisations vidéo qui sont vraiment professionnelle et "haut de gamme" !
-
What an elegant machine. I love how you built this. Strong but very attractive. Works like you said. Power Hacksaw. Very accurate. I'm impressed. like to see someone try to cut that as well as your machine!
-
Победитель конкурса - "Что можно сделать из обычной ножовки".
Ножовку конечно жалко, кому она теперь, с дырками ... -
В 80х работал на заводе, там такие станки, советские, трудились! Только проще и эффективнее. А это... наверное даже Festool, не сделал бы дороже.
-
Уже несколько лет смотрю Ваши ролики, уважаемый.. Очень нравится культура и точность при производстве механизмов и приспособлений. Равняюсь на Вас в своём хобби. Спасибо.
-
I like how it uses the entire blade. Most of these I've seen have a short cut stroke. This one take advantage of the whole blade.
-
Money and unnecessary expensive parts and materials are not a problem for this guy!
-
This is the most overengeneered hacksaw i've ever seen, and the cost of materials is ridiculous. Such a pleasure to watch though.
-
It turned out to be a wonderful machine! I would add a small reservoir and coolant pump only. And of course a base to collect and filter the fluid when working
-
Nice work, but I have a feeling that rthe same amount of money (or maybe a bit more) you can buy a.small bandsaw which works faster and more capable ,(like cut in angles, upgrade possibilities, etc.)
-
The criticism from the last saw was implemented very well. Now she's perfect. I just think that you could buy one for the cost of the materials. 👍👍👍👍👍
-
It is a wonderful piece of art! , where can you find all parts, hardware, and I think this is very expensive to built, as a hobby it’s ok. Sir you did an excellent job!!!
