Testing out the NEJE 40W Laser cutter/engraver
26,931
Published 2021-02-12
Links:
wiki.nejetool.com/doku.php?id=nejelaser_master_2_p…
Music:
All from YouTube Audio Library
Outside the Box - Patrick Patrikios
Hooky with Sloane - Bird Creek
Hitting the Streets - JR Tundra
All Comments (12)
-
Nice demonstration.
-
Hi thanks for this video, very informative. I'm new to laser cutting, i had a couple of questions if you could help. Does the laser include an air assist? And do you need an air/fume extractor for the smoke? Thank you for any help
-
I just got mine but have not tried over 10% yet, it is better to have low power and then burn several times or at lower speed you can make your own pictures in paint or other program and save them as PNG or BMP and put them in the folder c / neje / My Collection. For metal, glass, plexiglass you can use toner from printer. I think.
-
Thank you for this video sir! Do you have some test results with acrylic maybe? Can it cut a 4 or 5 mm acrylic plate?
-
I do not remember the Youtube channel, but on wood and basically anything that would leave burn marks...they used painters tape to keep the edge from being blackened as much....
-
Good job. How do you change the letters in a vector graphic?
-
it feels like there's something deceptive with the watt rating. The glowforge will cut out the 3mm wood with 1 pass, not even a slow one. The output of these 40W diodes appears to be 5.5W or 15W?
-
Thank you for this nice video! It was very helpful for me. I have a question about the precision: is this laser still precise if you cut/engrave with higher speed? I read about a „bouncing“ laser because of the triangle stand. Can you tell something about that?
-
Hi, will this work on metals such as SS and Aluminium ?
-
could you try to cut on leather 3mm thick? thank you so much.. i appreciate it
-
hello sir . thank you for sharing this helpful video , i want to order a laser machine and I'm thinking about the NeJe master 2 max 40w with a budget 526 dollar . for me i want this machine to cut mdf 6 mm up to 8 mm o r plywood , do you think that neje Master 2 max 40 w can do this job or i must to buy a co2 machine with 50 w. but for the c2o machine Always i saw in youtube vedio that you must change the piece all time
