DIY Laser Module Height Adjustment Mechanism for the NEJE 40W Laser
16,026
Publicado 2021-07-02
⏱️TIMESTAMPS⏱️
0:00 Intro
0:49 Design
1:25 Lightburn design
1:49 Prototype
3:17 Not so easy
5:00 Frankenstein's monster
6:00 Its alive
Lightburn design file for the NEJE Laser Module adjustment mechanism. Cut settings for 3mm Black Acrylic 100mm/m @90% power, single pass:
github.com/maker-z/LaserAdjustment
Music:
Walking Dead - Wellmess www.epidemicsound.com/track/a2Pjc9wAtL/
I Don't Give A ... (Instrumental Version) - Def Lev. www.epidemicsound.com/track/airwO8CS18/
Sin City - Sven Karlsson www.epidemicsound.com/track/m2EZ1qMEbu/
Todos los comentarios (20)
-
TY for this. I have a NEJE on the way. Will give this a try.
-
Thats a great design! Was thinking about adjusting it with screw too.
-
Hi many many thx for the info and the file. I cut the adjust Module with plywood 3 mm. and paint it black. I use a hot glue gun to fix the screw nut. Built all together incl. air assist and and it works fine. thx again cu Steve
-
Great video. Thanks for the idea. Where did you buy your laser bed from ?
-
genious.
-
Out of curiosity, have you had any overheating issues at all? A significant portion of the fan is now covered. I have a substantial air assist that would make up for it when it was in use...but it's not always in use lol. Thanks for the share btw, I initially had some troubles downloading, but googling how to download from github solved the problem for me entirely.
-
Very very cool idea!! I love it!!! What size bolt are you using? Length and size? Thank you so much!
-
I downloaded it, cut some 3mm black acrylic at 100mm/m and 90%. It cut great. I may need to try it at you focal point. I had it at 17mm and the intersection of the pieces is just a bit tight. I didn't know if using a kerf offset might help or change the focus. I am trying to copy and adjust for the thickness but not getting the results I wanted.
-
Hi, I loved the video. What is the correct focus height you use? I can't focus my laser...I have the same one as yours. Thank you!!!
-
Nice video! One question. Is It a double beam 40w neje modulo ? Thank you
-
4:37 haha definitely a good idea!
-
I came here out of curiosity to see if you were using the same design i'm using and i became interested in your Laser Cutting Bed? Is that 3d printed? If so is there a file available or you just made it yourself?
-
Have you found the added weight of the acrylic to effect the machine any at speed or accuracy?
-
Hi everytime I try to download and load the file it loads nothing?
-
how to download the file and run it on lightburn?🙏
-
if u share the parameters u using , that would be wonderful for us
-
What's your focal distance to cut?
-
r u gona put this on thingiverse?
-
could u share the dxf files of the pattern?