Cutting acrylic with the NEJE 40W Laser cutter/engraver

58,471

481 0

Published 2021-03-02

Doing a few test cuts on 3, 4.5, and 5mm Acrylic with the NEJE 40W Diode Laser cutter/engraver.

Music:
Virginia Highway - Tigerblood Jewel www.epidemicsound.com/track/JVtkyZJvzc/
Gold in Our Pockets - Tigerblood Jewel www.epidemicsound.com/track/WxFG7nXDJC/
Love For The Ocean (Tigerblood Jewel Remix) - Pastis www.epidemicsound.com/track/JiBb904wV7/

All Comments (21)

@auxpower13 3 years ago

Thanks for making the video and doing this in a fairly scientific way. Thanks also for finding the music I will listen to in my lab this week.
@RubberheadStudios0001 3 years ago

I just got this machine and it's pretty decent. I also have an atom stack A5. I love that work horse. 40 watt is nice to have.
@user-mc2gm6fz9i 1 year ago

Does anybody know how to adjust for kerf when the laser focus is a rectangle like with the 4063 or 4064? I would appreciate since this is a big killer of any precise cutting project for me now
@fahimmahmood1139 3 years ago

The real fun part at 3:41
@naipkrub 2 years ago

Thank you so much for make this video. I have NEJE 5w but not good to cut Acrylic I want to buy NEJE 40W to cut Acrylic 3mm I think NEJE 40W is ok for me.
@richfaraone 3 years ago

Try setting your focus to the bottom of the acrylic. Smooth clean cuts at a much lower power and no melting.
@konstantinw.472 2 years ago

Hey Maker Z, amazing video! do you know if its possible to cut glass?
@corneliomerchan5525 2 years ago

Thank you very much for making this video. it's very illustrative and it really makes you want to work ... please I have a question. What is the program you use to generate the cut in various speed and power calibrations in a single file ?. thank you very much again. greetings from Ecuador
@veek2767 3 years ago

Do you think this machine is worth getting if I need to cut acrylic and quarter inch woods?
@JamesElise160 3 years ago

Excellent, I'm just about to start cutting with mine, so you've taken out the trial and error for me :) Do you think it will cut different colours of the same thickness?
@kapral_jedziniak 3 years ago

for clean cutting acrylic, blowing air is needed
@NomadWorks 1 year ago

Will it cut clear acrylic?
@Pavelmjoy 1 year ago

Think need to try with air pumping . Much faster should be .
@HelgeKeck 2 years ago

i came for the laser but i stayed for the music
@dreamfactory1905 2 years ago

Thanks for making this video! I was thinking to upgrade my laser module to 40w mainly for cutting 3-5mm plywood, was wondering can it cut thru 3mm plywood in single pass?
@perplexer731 2 years ago

Thanks for the comparison. How about the smoke? Do you have to pay attention to something here?
@brightsky2427 2 years ago

only works on black acriylic?
@nexuzinnovation-com 2 years ago

hi, may I know which NEJE laser cutter at optimum power that can cut acrylic 2mm to 5mm thick panel ? ( the model of minimum watt below 40W )
@Bobster986 2 years ago

If you can hookup a air assist to it you might find that it requires less power extending your lasers life performance.
@michaelskuczas7460 3 years ago

Using 3 mm black acrylic I got nice cuts with my 40 watt NEJE. I left the protective "cover" on. Got a decent cut at 50% 200 mm min 2 passes. Also did a cut out of my shorten name "Mike" in New Times Roman at 125 mm min at 40% 3 passes. Your video is much appreciate. Recommend you get a honeycomb bed for cutting. It should improve you cutting of designs with details in them.